Panhard Bar – 16″ Long

Provides lateral axle control in rear suspension systems. Measures 16″ eye-to-eye. 

Front Trail Arm Bolt-In Plate Bolt Kit – Right Side (G1 / G2 / G3)

Hardware kit for securing the front trail arm bolt-in plate on the right side.

Compatible with G1, G2, and G3 chassis generations. 

Front Trail Arm Bolt-In Plate Bolt/Spacer Kit – Left Side (G1 / G2)

Used to secure the front trail arm to the bolt-in plate on the left side of G1 and G2 chassis.

Includes bolt and spacer components for proper alignment and secure mounting. 

Front Trail Arm Bolt-In Plate Bolt Kit – G3

Hardware kit specifically for securing the front trail arm to the bolt-in plate on G3 chassis models. 

Front Trail Arm Bolt-In Plate Only – G2 to Current
This bolt-in plate is designed for G2 to current chassis models and serves as a replacement for the traditional height adjuster and pinch clamp setup.

Note: This plate is 1/3 lb heavier than the previous configuration, offering a simplified, more rigid mounting option if desired by the customer.

Panhard Pinch Clamp

Connects the Panhard bar to the chassis, allowing for secure and adjustable lateral positioning in the rear suspension setup. 

Pull Bar Height Adjuster

Used to fine-tune the mounting height of either a left-side or right-side pull bar. Provides adjustability for optimizing rear suspension geometry and traction setup. 

Rear Trailing Rod

Available in lengths from 17″ to 20″.

Note: Please specify desired length when ordering. 

Trail Arm Height Adjuster
Used to raise or lower the front of the rear trail arm, this component is essential when higher trail arm angles are needed for tuning suspension geometry and traction.

Ideal for fine-tuning rear grip and chassis response under acceleration.

Trail Rod Pinch Clamp

Used to securely connect the front of the trail rod to the trail rod height adjuster. Provides adjustability and stability in rear suspension geometry.